Automatic Vacuum Lamination Line - AVL-S2

 

Featuers

- Configuration: Pre-tack + Vacuum Lamination + Flattening (Optional)
- Employs vacuum, heat and high pressure to achieve perfect lamination with excellent encapsulation and no air trapped.
- The pre-tack unit prepares cut-to-size film and pre-tack the film on substrate for next-step vacuum lamination.
- Applies two-step lamination - dynamic and static slap down, to ensure excellent adhesion.
- Utilize silicon rubber belt conveyance to eliminate the cost of PET carrier film and time wasting of PET replacement. (If choose to add flattening unit, silicon rubber belt system must be switched to PET carrier conveyance.)
- Optional lateral cut function aims to trim dry film in machine, benefits the production environment of high mix / low volume - not neccessary to frenquently change dry film with different width.

 

Specifications

- Operation Mode: Automatic Operation
- Conveyance System: Silicon Belt Conveyance System (option: PET carrier conveyance)
- Option: Flattening Unit (The conveyance must be switched to PET carrier conveyance.)
- Min. Panel Thickness: 50μm
- Panel Dimension: min. 220 x 220mm; max. 610 x 610mm
- Footprint (L x W x H): 4,042mm x 2,043mm x 2,587mm